![\"\"](\"https:\/\/www.audioexcite.com\/wp-content\/uploads\/2013\/12\/r3004-602010.jpg\" "\\"r3004-602010\\"")
<\/a>![\"\"](\"https:\/\/www.audioexcite.com\/wp-content\/uploads\/2013\/12\/d3004-602010.jpg\" "\\"d3004-602010\\"")
<\/a><\/p>\nOn the test bench this time I\u2019ve measured and compared two different compact sized tweeters from the ScanSpeak Illuminator series, the R3004\/602010 and the D3004\/602010.<\/p>\n
For measurement details see:<\/p>\n
ScanSpeak D3004\/602010<\/a> <\/p>\n <\/p>\n These two tweeters are essentially the same tweeter. They share the same housing, face-plate and motor system. The \u201cR\u201d version is the ring dome version and the \u201cD\u201d version is the 1\u201d textile dome version.<\/p>\n <\/p>\n If we compare the two tweeter versions they differ as follows:<\/p>\n R3004\/602010<\/strong><\/p>\n <\/p>\n D3004\/602010<\/strong><\/p>\n <\/p>\n (click on picture to zoom)<\/p>\n Blue = “R” version<\/strong><\/p>\n Green= “D” version<\/strong><\/p>\n If we look at and compare the tweeters impedance response, we see that they are almost identical. The “D” version has about 0.2 Ohm higher impedance than the “R” version.<\/p>\n <\/p>\n (click on picture to zoom)<\/p>\n Blue = “R” version<\/strong><\/p>\n Red = “D” version<\/strong><\/p>\n Upper Left:<\/strong> On-axis @ 1m<\/p>\n Upper Right:<\/strong> 15deg off-axis @ 1m<\/p>\n Middle Left:<\/strong> 22.5deg off-axis @ 1m<\/p>\n Middle Right:<\/strong> 30deg off-axis @ 1m<\/p>\n Lower Left:<\/strong> 45deg off-axis @ 1m<\/p>\n
\nScanSpeak R3004\/602010<\/a><\/p>\n<\/a><\/a><\/p>\n\n
\n<\/strong><\/li>\n<\/ul>\n\n
<\/a><\/p>\n<\/a>\u00a0<\/a><\/p>\n<\/a><\/a><\/p>\n<\/a><\/a><\/p>\n